The MD-QUAD from Decimator Design is a low cost, miniature 3G/HD/SD-SDI 4 to 1 Quad Splitter or 4 to 1 input multiplexer, featuring linked (3G/HD/SD)-SDI and HDMI Outputs.
NEW Features (available via firmware 1.4.6 update excluding units with serial numbers starting with MQS) include:
Professional 3G/HD/SD Test Pattern Generator featuring:
- 26 Selectable Output Formats
- 54 Test Patterns including Luma and Chroma Zone-plates
Audio Tone Generator
In Quad-Split mode the first 8-channels of audio from any input can now be passed to both the HDMI and SDI output
On-screen audio id pop-up when selection audio source in Quad-Split mode
On-screen display pop-up when using the rotary to allow for use when without a PC
Low cost miniature (3G/HD/SD)-SDI 4 to 1 Quad Split or 4 to 1 input multiplexer
Selectable output format in Quad-Split mode
Low latency buffering for each input allowing non-synchronous inputs
Linked (3G/HD/SD)-SDI and HDMI outputs
4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
8-Channel Audio metering for each quadrant with:
- The first two audio groups are individually selectable
- Vertical or Horizontal Bars
- AES/EBU, VU, Extended VU, BBC, EBU, DIN and NORDIC Scales
- Bar & Float, Bar only or Float only (Float alone not available for MQS Serials)
- Transparency Adjustment
- Separete Bar abd Float Ballistics Control
- Adjustable Reference Level
- Red, Yellow, and Green Range Adjustment
- Bar Thickness Adjustment
- Margin Adjustment
Each quadrant is independent of the others, allowing any 3G/HD/SD format of
any frame rate to be displayed simultaneously
Variable aspect ratios per quadrant
All 4 inputs can be displayed simultaneously on a single output
Pass-Through mode allowing any of the 4 inputs to be selected for output
In Pass-Through mode the selected input is passed through to both the (3G/HD/SD)-SDI and HDMI outputs
On-Screen 16 character IDs (UMDs) for each input
A single tallies for each input is available from the GPI
An extensive selection of user controllable functions via an easy to use rotary
encoder for menu selection. LEDs and a push button can then be used for
status and control
USB port for control and updates
GPI on RJ-45 for remote switching
Locking DC Power Socket
The following is included with the unit:
Power Supply, HDMI Cable, USB Cable and Mounting Bracket
Have you purchased or used this product before?
Why not help others by giving them the benefit of your opinion.
Simply click here to Log On or register and enter a few details about your experience with this product.
Your personal details are not shared with others and your review is counted with others to form an average rating. To guard against spam and inflammatory remarks, all reviews will be moderated before they are posted.
There are currently no reviews for this product.