AJA Video Systems - HD10CEA D-A converter - SDI / HD-SDI to Analoge Video + Audio
HD10CEA converts SDI/HD-SDI video with embedded audio to analog video
and 4 channel balanced analog audio. SD video outputs can be configured
as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). HD
video outputs can be configured as YPbPr or RGB. Analog audio outputs
are balanced. The 4 audio channels can be selected from group 1-4. Audio
and video output connections are available on a 25 pin â€œDâ€
subminiature connector (breakout cable supplied). All video/audio
configuration is done by external dipswitch selection. This versatile,
low-cost, miniature monitoring solution also outputs two loop-thru
- Digital to Analog Audio and Video Converter
- SDI/HD-SDI with Embedded Audio Input
- SD Component or Composite Video Outputs (SD Input)
- HD Component Video Outputs (HD Input)
- 4 Channel Balanced Audio Output
- 2 Equalized, Loop-Thru SD/HD-SDI Outputs
- Selectable Audio Channel Pair/Group
||SDI/HD-SDI w/Embedded Audio, 1x BNC
||YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video)
||4 Channel Balanced
||Video/Audio Outputs on 25 Pin D Connector
||2 SDI/HD-SDI Equalized Loop-Thru, 2x BNC
||Audio Group 1 - 4
|Audio Level (adjustable via switch selection):
||+24, +18, +15, +12 dBu, Full Scale Digital
||5.8" x 3.1" x 1" (147 x 79 x 25mm)
||+5-18VDC, Regulated, 4 Watts, Power Supply Required
Have you purchased or used this product before?
Why not help others by giving them the benefit of your opinion.
Simply click here to Log On or register and enter a few details about your experience with this product.
Your personal details are not shared with others and your review is counted with others to form an average rating. To guard against spam and inflammatory remarks, all reviews will be moderated before they are posted.
There are currently no reviews for this product.